How to Buy a Home Blender What to Look for in a Cooker

First, the first thing to pay attention to in the purchase of mixers is safety, safety is also divided into several aspects

1, the motor is not waterproof.

The old-fashioned motor is most afraid of water. Now the good brands are waterproof. Cups are not tightened juice leakage into the machine will not burn the machine? Will it be electrocuted? Pour some water into the water out from underneath, the motor is not bad? Touch or not electrocuted? All these are testing the waterproof performance of the motor. Remember to use waterproof motor.

2、Why does the motor need thermal protection?

The role of thermal protection is to prevent the motor from overheating under abnormal working conditions, thus causing serious damage such as machine combustion.

Thermal protection device not only has the function of protecting the motor, but also can enhance the working life of the motor.

3、 Is it safe to use?

The machine is equipped with a built-in switch (not like the kind of switch on top of the TV, but a kind of invisible switch), the blade alone on the host machine will not work. Even if you forget to turn off the machine, built-in overheating protection device, will automatically cut off the power supply, daily use is very safe and convenient.

4, why use food-grade plastic?

The so-called “food-grade” plastic, that is, can be in direct contact with food, will not cause chemical changes or precipitation of harmful substances to the human body, the flavor of the food will not have any effect.

Plastic is one of the most commonly used substances in daily life, substandard or contaminated and so on is very common, such as the most common disposable cups have a taste of the problem and so on. Therefore, the choice of cooking machine motor is important, plastic parts are equally important.

Second, the second should pay attention to the motor speed

Ordinary motor a minute normal in 8000 - 9000 rpm better 12000 rpm, and the use of foreign technology can reach 23000 - 26000 rpm. It can beat the fruit meat, fruit juice very fine. Let you completely drink out, 4, 5 months of children with the bottle can also be sucked.

Third, again to pay attention to is the durability of the knife

Knife is a very important part of the cooking machine, with a long time will be blunt? Do you need to grind it or change it? This is a problem that everyone is concerned about! Previously, the old-fashioned machine with the knife are sharp, then a long time the knife is blunt, to grind and not good grinding, had to go to change, but also cost money, the return trip, the blade money have to pay. And now the knife itself is a blunt knife. So do not have to grind do not have to change, with a year so, two or three years or so, like the back of this knife, is to rely on the speed to break, so it hit hard things, out of all the powder is not very coarse particles. For example, you hit at home American ginseng, hippocampus, deer antler, angelica, sesame powder are powder. Soybeans, mung beans and their hardness is about the same.

To beat the red dates, for example: to beat the red date kernel, date kernel is particularly hard, the general machine can not hit, why? The reason is very simple! Ordinary machine blade is the most common stainless steel, our home cutter is also stainless steel. But cut a period of time to grind, why? Stainless steel itself does not have hardness, so with ordinary machines often hit the higher hardness things, easy to roll mouth, or easy to bend. And the effect of using this kind of knife is that it starts to rattle a little, and then it is gone immediately. Because this knife is hard alloy steel, containing tungsten and manganese composition hardness is particularly good, do not have to change the knife grinding knife so troublesome. Generally a few seconds red date kernel is broken, and according to your favorite degree of coarseness and fineness to determine the length of time to play. To be thicker, shorter time, to be finer time longer.

Fourth, pay attention to whether it is easy to clean

A lot of people with soybean milk machine know that cleaning is not easy, that is because the usual mesh is woven steel wire thicker, and not good to wash bad brush, easy to block slag. Now using the latest imported steel, laser point holes on both sides, very clean, not blocking slag, not hanging pulp, a faucet punch on the line.

Before the cleaning is very troublesome to have a juicer cover ah, filter ah, blade ah, catch juice cup slag cup, a whole lot of things to wash. Now the machine has an automatic cleaning effect, that is, just pour water into the container, tighten the knife plate, assembling the machine for about 10 seconds of instantaneous operation, you can remove the food impurities on the blade. After cleaning, you can continue to squeeze other fruits without affecting the original flavor of the juice. When not in use, just wipe it clean with a soft cloth.